Staff Directory


Nor Farah Huda Binti Abd Halim

Academic Qualifications

  • PhD in Engineering - Doctor of Philosophy, University of Warwick
  • Master of Science ( Manufacturing Engineering - Masters Degree, International Islamic University Malaysia
  • Bachelor of Engineering (Manufacturing)(Honours) - Bachelor Degree, International Islamic University Malaysia

Nor Farah Huda Binti Abd Halim (Assoc. Prof. Dr.)

Associate Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING

farahudahalim@iium.edu.my
4422


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Milling and Process Materials - Conventional Machining, Ultrasonic Assisted Machining, Cryogenic Machining, Composites Material
  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Machining/Rapid Prototyping and Tooling (Including Standard Supporting Technologies of Precision Machining and Micro Machining)


Teaching Responsibilities


Advanced Computer Aided Manufacturing 2025/2026 2024/2025 2023/2024 2021/2022 2019/2020
CAD/CAM/CAE 2025/2026 2024/2025 2023/2024 2022/2023
COMPUTER AIDED DESIGN AND MANUFACTURING 2024/2025 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
COMPUTER AIDED DESIGN AND MANUFACTURING(CAD/CAM) 2021/2022 2020/2021 2019/2020 2018/2019
COMPUTER AIDED DRAWING 2024/2025 2023/2024 2022/2023 2021/2022 2020/2021
ENGINEERING DRAWING 2023/2024 2019/2020 2018/2019
FINAL YEAR PROJECT 2 2025/2026 2024/2025
FINAL YEAR PROJECT II 2024/2025 2023/2024 2022/2023 2019/2020
MACHINE TOOLS 2018/2019
MANUFACTURING ENGINEERING LAB II 2024/2025 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
PROJECT I 2019/2020 2018/2019


Supervision


Experimental Investigation On Machining Performance And Surface Quality During Milling Of Cfrp In Different Cutting Conditions.
Ph.D In Progress Main Supervisor
Machinability Of Titanium Alloy (Ti-6al-4v) Under Hybrid Nanofluid Minimum Quantity Lubrication Using Recycled Vegetable Oil-Based Fluid With Silicon Dioxide And Aluminium Oxide .
Ph.D In Progress Co-supervisor
The Influence Of Cutting Parameters On Tool Wear And Surface Quality In Milling Of Carbon Fiber Reinforced Polymers.
Master Completed 2026 Main Supervisor
An Experimental Investigation On Tool Wear And Surface Damage In Milling Carbon Fiber Reinforced Polymer Composites.
Master Completed 2024 Main Supervisor
Effect Of Coated Carbide Cutting Tool On Surface Roughness And Wear Mechanism In End Milling Of Titanium Alloy Using Minimum Quantity Lubrication With Silicon Dioxide Nanoparticle.
Master Completed 2024 Co-supervisor
Experimental Analysis On Tool Wear And Surface Roughness In Milling Carbon Fiber Reinforced Polymer With Uncoated Tungsten Carbide Tools.
Master Completed 2023 Main Supervisor
Enhancement Of Mechanical Performance And Microstructure Properties Of Mortar Incorporated With Dredged Sediments And Carbon Fiber Reinforced Polymer Waste.
Master In Progress Co-supervisor
Tribological Performance Of Biodegradable Palm Oil-Based Lubricant Enhanced With Additives Under Varying Load And Speed Conditions.
Master In Progress Co-supervisor


Research Projects


Completed
2024 - 2025 Eco-Cities and Clean Energy : A COIL-Enhanced Global Mobility Program for Sustainable Research and Cultural Exchange
2020 - 2023 Machinability Investigation of GO/SiO2 Hybrid Nanoparticle ? MQL Lubrication System in End Milling of Titanium Alloy for Sustainable Machining Environment
2020 - 2023 Elucidation of the cutting temperature induced-damaged of CFRP during edge milling in sustainable manufacturing environment.
2020 - 2023 Reliability Evaluation of the ZTA Doped Nano TiO2 and Cr2O3 Ceramic Cutting Tools for High Speed Turning Process of Metal
2019 - 2024 Investigating the immobilization of silver nanoparticle (AgNP) catalyst on activated carbon (AC) derived from durian's skin.
On-Going
2025 - Present Touchpoints of Inclusion: Support for Accessible Learning Resources
2025 - Present Touch2Read: Public Showcase of Braille and Tactile Innovation for Inclusive Learning
2021 - Present Thermal degradation mechanism and surface behavior of CFRP composite during milling process


Publications


Articles

2025 Evaluating dredged sediment from Sungai Pusu, Gombak as partial replacement of sand in concrete production. Borneo Journal of Sciences and Technology (BJoST), 7 (2) pp. 38-58
2025 Experimental investigation on tool wear and surface integrity during wet and dry milling of carbon fiber reinforced polymer (CFRP). Jurnal Tribologi, 46 () pp. 122-140
2025 Investigating adsorption isotherms and kinetics, and ecotoxicity of activated carbon from carbon-fiber reinforced polymer (CFRP). Chemical and Natural Resources Engineering Journal, 9 (2) pp. 70-83
2025 The impact of cutting speed and feed rate on tool wear and surface damage during the milling of CFRP composites. International Journal of Engineering Materials and Manufacture, 10 (4) pp. 109-117
2024 Effect of dry and MQL cutting condition on coated carbide cutting tool during the end milling of Ti-6Al-4V titanium alloy. Jurnal Tribologi, 41 () pp. 162-176
2024 Evaluation of the surface roughness and dimensional accuracy of low-cost 3D-printed parts made of PLA–aluminum. Heliyon, 10 (4) pp. 1-13
2023 Analysis on tool wear during milling carbon fiber reinforced polymer in dry, coolant and chilled air condition. Jurnal Tribologi, 36 (March 2023) () pp. 99-107
2023 Effect of feed rate on tool wear and surface condition during milling of CFRP. Jurnal Tribologi, 38 () pp. 40-48
2023 Properties and tribological evaluation of graphene and fullerene nanoparticles as additives in oil lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237 (8) pp. 1647-1656
2023 Tool wear and wear mechanism of WC-Co End Mill during milling of CFRP in sustainable cutting conditions. Materials Science Forum, 1109 () pp. 153-158
2022 Optimization study on width of cut and cutting-edge radius during side milling of DAC 55 steel. Jurnal Tribologi, 33 () pp. 125-136
2020 An experimental investigation on drilling of aluminum alloy (Al 7075) using high speed steel cutting tools. TEST: Engineering & Management, 83 (May-June) pp. 1451 -1456
2020 The Effect of Printing Parameters on Scaffold Structure Using Low-cost 3D Printer. TEST Engineering & Management, 82 () pp. 8255 -8263
2020 The effects of printing parameters on the surface quality of metal composite by using fused deposition modeling. Solid State Technology, 63 (5) pp. 866-874
Conference or Workshop Items

2023 Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering,
2023 Influence of cutting edge radius (CER) and width of cut (WOC) on tool wear in milling SUS 316 stainless steel. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering,
2023 Investigating the synthesis of activated carbon from carbon chips of carbon fibre reinforced polymer for the removal of methylene blue. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022),
2022 Investigating the Synthesis of Activated Carbon from Carbon Chips of Carbon Fibre Reinforced Polymer for the removal of Methylene Blue. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering,
2022 The effect of cutting speeds on tool wear and surface roughness when milling carbon fiber reinforced polymer. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021),
2021 An experimental investigation on surface quality of CFRP after milling in cutting fluid environment. In: 7th International Conference on Applications and Design in Mechanical Engineering (ICADME 2021),
2021 An experimental study of tool wear during end milling of carbon fibre reinforced polymer in cutting fluid condition.. In: 7th International Conference on Applications and Design in Mechanical Engineering (ICADME 2021),
2021 Performance of low-cost 3D printer in medical application. In: Manufacturing Science and Engineering Conference ( Virtual Conference ),
2017 Analysis of tool wear, cutting force, surface roughness and machining temperature during finishing operation of ultrasonic assisted milling (UAM) of carbon fibre reinforced plastic (CFRP). In: Advances in Material and Processing Technologies Conference (AMPT 2017),
2016 Machinability study of ultrasonic assisted machining (UAM) of carbon fibre reinforced plastic (CFRP) with multifaceted tool. In: 7th CIRP Conference on High Performance Cutting 2016,
2016 Ultrasonic assisted machining. In: The 17th International Conference on Machine Design and Production,
2011 Experimental study of cutting parameter for drilling on fabric carbon/epoxy composite laminates. In: 2011 International Conference on Advanced Design and Manufacturing Engineering, (ADME 2011),
2011 The application of Quality Function Deployment (QFD) and Rapid Prototyping (RP) technology in improving the design of anti sleep driving alarm. In: Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management,
Books

2023 Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering. Springer Nature, ISBN: 978-981-19-9508-8
2023 Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering. Springer, ISBN: 978-981-19-9508-8
Book Sections

2024 The influence of cutting conditions on surface roughness and chemical properties behaviour of CFRP during milling. In: Department Mechanical & Manufacturing Engineering Faculty of Engineering Universiti Putra Malaysia, ISBN: , pp. 70-74